The CEC behaviour of several synthetic peptides related to the activin betaA-betaD subunits.

The resolution of several structurally related synthetic peptides, derived from the loop 3 region of the activin betaA-betaD subunits, has been studied using capillary electrochromatography (CEC) with Hypersil n-octadecylsilica as the sorbent. The results confirm that the CEC migration of these peptides can be varied in a charge-state-specific manner as the properties of the background electrolyte, such as pH, salt concentration and content of organic modifier, or temperature are systematically changed. Acidic peptides followed similar trends in retention behaviour, which was distinctly different to that shown by more basic peptides. The CEC separation of these peptides with the Hypersil n-octadecyl-silica involved distinguishable contributions from both electrophoretic mobility and chromatographic retention. Temperature effects were reflected as variations in both the electro-osmotic flow and the electrophoretic mobility of the peptides. When the separation forces acting on the peptides were synergistic with the electro-osmotic flow, as, for example, with the positively charged peptides at a particular pH and buffer electrolyte composition, their retention coefficient, kappacec, decreased with increasing capillary temperature, whereas when the separation forces worked in opposite directions, as for example with negatively charged peptides, their kappacec values increased slightly with increasing temperature. Moreover, when the content of organic modifier, acetonitrile, was sufficiently high, e.g. > 40% (v/v) and nonpolar interactions with the Hypersil n-octadecyl-silica sorbent were suppressed, mixtures of both the basic and acidic synthetic peptides could be baseline resolved under isocratic conditions by exploiting the mutual processes of electrophoretic mobility and electrostatic interaction. A linear relationship between the ln kappacec values and the volume fractions, psi, of the organic modifier over a limited range of psi-values, was established for the negatively charged peptides under these isocratic conditions. These findings thus provide useful guidelines in a more general context for the resolution and analysis of structurally related synthetic peptides using CEC methods.

Characterization of open tubular capillary electrochromatography columns for the analysis of synthetic peptides using isocratic conditions.

In this paper, we report on investigations related to the performance characteristics of two different types of etched chemically (n-octadecyl- and cholesterol-) modified capillaries in the open tubular format of capillary electrochromatography (CEC) for the analysis of synthetic peptides. The results confirm that the nature of the surface chemistry used to modify the capillary wall and type of chemically bonded group employed can affect the selectivity as well as the resolution of peptide samples. The results are consistent with the participation of selective peptide interactions with the bonded phase, although other factors, such as the morphology of the capillary wall surfaces, appear to be also involved. Moreover, several surprising observations related to peptide-specific multi-zoning effects have been observed. Additional experimental variables that can also be utilized to affect the retention of peptides in this approach to OTCEC include the type and percentage of organic solvent modifier employed in the eluent and the pH of the buffer system. To evaluate the reproducibility of different batches of the n-octadecyl- and cholesterol-modified capillaries and the stability of the chemically modified surface, the OTCEC selectivity and peak shape behavior of two small basic molecules (serotonin and tryptamine) and two proteins (turkey and chicken lysozyme) were also investigated. Finally, the use of the "bubble" cell technology for creating the detector window has been shown to provide significantly higher detection sensitivity with peptides, as compared with the conventional capillary format.

Electrochromatographic characterization of etched chemically-modified capillaries with small synthetic peptides.

In this investigation, various capillary electrochromatographic (CEC) experiments have been employed to characterize the properties of etched, chemically-modified surfaces of open tubular capillary columns with peptides as solute probes and under conditions of variable voltage, temperature and solvent composition. The separation performance of etched capillaries with either n-octadecyl or liquid crystal moieties derived from a cholesterol phase bonded to the surface were compared. With the liquid crystal bonded species, interesting and significantly different variations in retention behavior of peptides are obtained compared to those observed with the corresponding n-octadecyl modified surfaces by changes in temperature, solvent composition and field strength. These peptide separations illustrate the usefulness of this CEC approach for practical applications, where both the retention characteristics of the charged analytes as well as the selectivity differences due to the surface properties of the etched chemically-modified surfaces of open tubular capillary columns can be rationally modulated. As in HPLC, appropriate choice of CEC experimental variables, including the chemical properties of the immobilized ligand(s), represents a powerful tool for optimizing resolution.

The metal binding properties of the CCCH motif of the 50S ribosomal protein L36 from Thermus thermophilus.

The TthL36 protein of the 50S ribosomal proteins from Thermus thermophilus has been found to contain the rare C(Xaa)2C(Xaa)12C(Xaa)4H (CCCH) sequence motif, a zinc finger binding motif, which for other zinc finger proteins is known to cleave RNA hairpins. In order to investigate the metal-binding properties of this T. thermophilus TthL36 protein, the core 26-mer polypeptide containing this CCCH motif was prepared by solid-phase peptide synthesis methods using Fmoc chemistry, purified by preparative RP-HPLC and characterized by circular dichroism, high-performance capillary zone electrophoresis and electrospray ionization mass spectrometry. Reaction of the acetamidomethyl (Acm)-protected polypeptide with iodine under acidic conditions resulted in the formation of the fully de-protected polypeptide. Of interest, the results demonstrate that the standard Acm-deprotection method with the synthetic TthL36 polypeptide using mercuric acetate in the presence of a large excess of 2-mercaptoethanol resulted in preferential formation of a very stable mercuro-polypeptide complex. The properties of the Acm-deprotected polypeptide in the presence of different metal ions were also investigated by spectroscopic methods. The results confirm that this TthL36 polypeptide containing the CCCH motif binds metal ions with different affinities, namely in the order Co(II)>Hg(II)>Zn(II).

HPLC of peptides and proteins: preparation and system set-up.

The eight basic modes of HPLC currently in use for peptide and protein analysis and purification are presented in this overview. They include: size-exclusion chromatography (HP-SEC), ion-exchange chromatography (HP-IEX), normal phase chromatography (HP-NPC), hydrophobic interaction chromatography (HP-HIC), reversed-phase chromatography (RP-HPLC), hydrophilic interaction chromatography (HP-HILIC), immobilized metal ion affinity chromatography (HP-IMAC), and biospecific/biomimetic affinity chromatography (HP-BAC). In addition, some subsets of these chromatographic modes, e.g., mixed mode chromatography (HP-MMC), charge transfer chromatography (HP-CTC), or ligand-exchange chromatography (HP-LEC) are described. The unit includes overviews of the system requirements and planning strategies for set-up of the systems.

HPLC of peptides and proteins: standard operating conditions.

The standard operating conditions for the eight basic modes of HPLC are presented in this unit. They include: size-exclusion chromatography (HP-SEC), ion-exchange chromatography (HP-IEX), normal phase chromatography (HP-NPC), hydrophobic interaction chromatography (HP-HIC), reversed-phase chromatography (RP-HPLC), hydrophilic interaction chromatography (HP-HILIC), immobilized metal ion affinity chromatography (HP-IMAC), and biospecific/biomimetic affinity chromatography (HP-BAC). In addition, some subsets of these chromatographic modes, e.g., mixed mode chromatography (HP-MMC), charge transfer chromatography (HP-CTC), or ligand-exchange chromatography (HP-LEC) are described. Procedures for multimodal column switching are also included, as are guidelines for a systematic approach to method development. Example separations help illustrate the procedures. The standard operating conditions for the eight basic modes of HPLC are presented in this unit.

Total chemical synthesis of human activin beta(A)[12-116] and related large-loop polypeptides.

We report here the synthesis, purification, and characterization of several large polypeptides related to the human activin beta(A) subunit and their cyclic counterparts. In particular, we describe for the first time the total chemical synthesis of a 105-mer polypeptide, des[1-11] activin beta(A), and related large-loop polypeptide, by an optimized solid phase synthetic protocol based on 9-flouroenylmethyoxycarbonyl (Fmoc) chemistry. These studies show that automated chemical synthesis utilizing Fmoc-based solid phase synthetic strategies provides a practical alternative to recombinant DNA technology for the production of activin-related subunits, with the opportunity to rapidly provide different analogues and structural variants for subsequent structure-function and associated biophysical investigations.

Direct characterisation by electrospray ionisation mass spectroscopy of mercuro-polypeptide complexes after deprotection of acetamidomethyl groups from protected cysteine residues of synthetic polypeptides.

In this paper, we describe a rapid procedure to characterise the products generated in the presence of mercuric salts following removal of the acetamidomethyl (Acm)-protecting group from cysteine residues of synthetic polypeptides prepared by solid-phase peptide synthesis (SPPS) methods. In particular, electrospray ionisation mass spectrometry (ESI-MS) procedures have been employed to characterise the mercuro-polypeptide products related to the ribosomal L36 protein isolated from the bacterium Thermus thermophilus. The results demonstrate that very stable mercuro-polypeptide complexes can form under standard conditions of deprotection involving Hg(2+) salts in the presence of a reductant such as beta-mercaptoethanol. Metal ion exchange effects involving other divalent metal ions, such as Co(2+) or Zn(2+), can also be monitored by similar procedures, thus permitting the relative affinity and selectivity for metal ion-polypeptide interactions to be qualitatively assessed. Since the Thermus thermophilus ribosomal L36 protein contains a putative zinc finger binding CCCH motif, these procedures enable the formation of metal-ion complexes of synthetic polypeptides related to this structural motif to be directly examined.

Determination of biophysical parameters of polypeptide retro-inverso isomers and their analogues by capillary electrophoresis.

The relationship between the electrophoretic mobility, microobs, Stokes radius, rs, ionization state, and solution conformation of the all L-alpha-polypeptide, 1, the corresponding retro-all D-alpha-polypeptide, 2, and several truncated analogues, 3-5, has been investigated under low pH buffer conditions by high-performance capillary zonal electrophoresis (HPCZE) with coated capillaries. The results confirm that, under these conditions, the all L-alpha-polypeptide, 1, and its retro-inverso isomer, 2, exhibit nonidentical electrophoretic mobilities and thus different Stokes radii. At higher pH values, i.e., pH 5.0, the electrophoretic behavior of this retro-inverso isomer pair, however, converges. These results indicate that variations in the dipole characteristics of the polypeptide main chain and subtle differences introduced by the spatial constraints of the L-alpha-Pro-->D-alpha-Pro residue replacement lead to differences in the Stokes radii and electrophoretic mobilities of these polypeptides. Since the observed electrophoretic mobilities, microobs, reflect the mean of the mobilities of each charge species participating according to their Stokes radius or their intrinsic charge and mole fraction abundances, the results confirm that polypeptide retro-inverso isomers with unmodified amino and carboxy termini are resolvable. This outcome was achieved despite their notional topographical and conformational similarities as assessed from high-field proton nuclear magnetic resonance (1H NMR) spectroscopy and circular dichroism (CD) spectroscopy.

Observations on the origin of the non-linear van't Hoff behaviour of polypeptides in hydrophobic environments.

In this paper we describe a general procedure to determine the thermodynamic parameters associated with the interaction of polypeptides or proteins with immobilised lipophilic compounds such as non-polar n-octyl groups. To this end, the binding behaviour of an all L-alpha-polypeptide, 1, and its retro-inverso-isomer, 2, has been investigated with an n-octylsilica and water-organic solvent mixture containing different percentages of acetonitrile or methanol over the temperature range of 278-338 K. The results confirm that non-linear van'ts Hoff plots occur with this pair of polypeptide isomers, depending on the solvent composition. These findings are consistent with the changes in the thermodynamic parameters, enthalpy of association, delta Hoassoc,i, entropy of association, delta Soassoc,i, and heat capacity, delta Cop,i, all having significant temperature dependencies. Theoretical relationship linking the changes in the delta Hoassoc,i, delta Soassoc,i and delta Cop,i values of these polypeptide-non-polar ligate systems, as a function of temperature, T, have been validated. Significant differences were observed in the magnitudes of these thermodynamic quantities when acetonitrile or methanol was employed as the organic solvent. The origin of these solvent-dependent effects can be attributed to the hydrogen-bonding propensity of the respective solvent. Involvement of enthalpy-entropy compensation effects associated with the interaction of these polypeptides with the hydrophobic ligates has also been documented. Analysis of empirical extra-thermodynamic relationships associated with molecular structural properties of these polypeptides, such as the slope term, S, derived from the plots of the logarithmic capacity factor, log k'i, of these polypeptides vs. the volume fraction of the organic solvent, [symbol: see text] as a function of temperature, T, has also revealed similar correlations in terms of the interactive behaviour of polypeptides 1 and 2 under these experimental conditions. These findings provide an extended thermodynamic and extra-thermodynamic framework to examine the solvational, conformational and other equilibrium processes that polypeptides (or proteins) can undergo in the presence of n-alkylsilicas or other classes of immobilised hydrophobic surfaces. The experimental approach utilised in this study with these topologically similar polypeptides thus represents a generic procedure to explore the behaviour of polypeptides or proteins in non-polar environments in terms of their molecular properties and the associated linear free energy relationships that determine their interactive behaviour.

RP-HPLC binding domains of proteins.

Procedures have been developed to identify the chromatographic binding domains of horse heart cytochrome c (Cyt c) and bovine growth hormone (bGH) during their interaction with reversed-phase sorbent materials. The procedure involves adsorption of the protein solute to the chromatographic sorbent, followed by proteolytic cleavage. Comparison of the proteolytic map obtained for Cyt c and bGH in free solution with the corresponding map obtained when these proteins are adsorbed to the chromatographic sorbent revealed significant differences in the digestion pattern. Following characterization of the peptides generated in both maps, the results indicated that specific regions on the surface of both Cyt c and bGH are inaccessible to tryptic cleavage when adsorbed to the hydrophobic surface of both a C-4 and a C-18 sorbent. Based on the assumption that the region of the protein surface that is in contact with the sorbent remains intact and bound to the sorbent during the digestion step, while the protein surface that is exposed to the solvent is accessible to proteolysis, the regions that were inaccessible to tryptic digestion were found to correspond to hydrophobic domains on the protein surface. These results also suggest that the three-dimensional structures of these proteins remain largely intact upon adsorption to the hydrophobic surface.

Systematic, computer-assisted optimisation of the isolation of Thermus thermophilus 50S ribosomal proteins by reversed-phase high-performance liquid chromatography.

Isolation of the 50S ribosomal proteins from Thermus thermophilus has been achieved for the first time using reversed-phase high-performance liquid chromatography based on the use of the non-end-capped LiChrospher RP-18 sorbent and computer-assisted method development for optimisation of the resolution. The separation approach for these basic ribosomal proteins utilised mobile phases of high ionic strength, to suppress silanophilic interactions with this type of reversed-phase sorbent. These conditions were found to be a key requirement for achieving good resolution with minimal peak-tailing. The retention times of the 50S ribosomal proteins of Thermus thermophilus were observed to be in very close agreement with the values predicted by computer simulation procedures based on linear solvent strength concepts, with an average error of only 0.5%, whilst base-line resolution was achieved for most of the adjacent peak zones. Following N-terminal sequencing, the proteins TthL5, TthL9, TthL18, TthL24, TthL29, TthL32, TthL34, TthL35 and TthL36 of Thermus thermophilus were readily identified. This approach thus provided a readily optimised strategy for the isolation of the 50S ribosomal proteins from Thermus thermophilus and should be generally applicable to the corresponding ribosomal proteins from various other species, as well as other classes of basic proteins present in crude extracts derived from other biological sources.